ODYS MultiFlat MF 700 DVB-T
6
EN
3 Quick
Guide
1. Connect the device to an appropriate power source
2. Only use the power supply unit provided.
3. Use the “Power Switch“ to turn the player on then select the desired source. Attention:
The DVD tray can only be open when in DVD mode.
4. Depending on your area, the antenna provided may not be strong enough. If such is
the case use a stronger antenna, available at most electronics shop.
5. Some of the device’s keys have more than one function. If you wish to use an alternate
function, shortly press the “MENU” key twice to activate the key pad.
6. Settings
In DVD Mode: DVD/DVB Setup key
In DVB-T Mode: DVD/DVB Setup key
In TV Mode:
LCD/Setup key
TV System: Great Britain, Ireland –
PAL I
West Europe –
PAL B/G (except France)
East Europe –
PAL D/K
NOTE:
Insure that DVB-T reception is available for your area. DVB-T radio in particular is very
limited and not available in most locations.
Depending on your region and building structure, a stronger antenna may be requires in
order to receive DVB-T stations. The antenna provided is only designed for reception
when close to the DVB-T transponder. Metal buildings and the geographic location of the
transponder may have a strong effect on the reception. Please note that this is not a
device defect; merely specific specifications for the reception of DVB-T.
Appropriate antennas may be obtained from your local specialty stores.
Active antennas may be powered with an external power source. Refer to the special
specifications of the antenna.
Display
To effectively use the size of the display, the standard setting for all formats has been set
to full screen. Changing this setting is not possible.
Region Code
DVD players and discs are coded by region. These regional codes must match the
played discs. If the codes don’t match, the disc cannot be played. This player’s default
code is region 2.
