ODYS MultiFlat MF 700 DVB-T
27
EN
7.8 AV Function
The player has an additional AV input so it can function as a monitor for a DVD player,
video cassette player, satellite receiver, video game, etc. When an AV source is
connected, press the AV button on the remote control or the SOURCE button on the front
panel to enter external input AV mode. The Picture Parameter Setup you can set as
shown in chap. 6.5.1.
Under AV mode, if there is no signal, the LCD screen will be blue.
When connected to an AV signal source, make sure the type of the selected AV signal
source is PAL.
7.9 Radio Function
Press the FM / AM button on the remote control or the SOURCE button on the front panel
to enter FM or AM radio mode. Then press the SEEK+/- button on the remote control or
the
/
buttons on the front panel for about 1.5 seconds to start searching
forward/backward from the current frequency. Press the SEEK+/- or
/
buttons again to
stop searching. Radio frequency will be displayed on the display panel.
Fine Tuning
Press the SEEK+/- button on the remote control or the
/
buttons on the front panel
once to fine tune the frequency forward/backward under radio mode.
Semi-memorizing radio stations
If you like a radio station and want to store it for later listening, press the SET button to
memorize it. “SAVE XX” will be displayed on the display panel, “X X” represents the
default station number.
There are two methods to organize the memorized stations:
•
Use the
▼
,
▲
buttons to adjust the channel number for your preference, and then press
the SET button again, the station will be memorized with the coded station number
•
Press the SET button again, the station will be automatically memorized with the default
station number in sequence
You can store radio stations from 0 to 19, total 20FM or 20AM radio stations.
If no buttons are pressed within 3 seconds of pressing the SET button first time, the
frequency will appear on the display panel again, and the station will not be stored.
