ODYS MultiFlat MF 700 DVB-T
36
EN
8 Troubleshooting
Problems
Causes and Solutions
The player cannot play.
•
Make sure a disc is loaded.
•
Make sure the disc is loaded with label side up.
•
Disc should be clean, not dirty or warped.
•
Player’s region code should be the same as the region code of the
DVD disc.
•
Make sure water condensation has not occurred. If it has, remove
the disc and keep the player power on until the moisture evaporates.
There is no sound
•
Make sure system connection is correct.
•
Make sure the player is not under muting mode.
•
Make sure the volume is adjusted to the lowest.
•
Is your disc dirty or warped? Clean or replace it.
There is no picture or
picture is unsteady.
Position of the picture is
incorrect.
•
Make sure the video type of the AV signal source is PAL.
•
Make sure system connection is correct.
•
Is your disc dirty or warped? Clean or replace it.
Cannot continue to play
and plays a section
repeatedly.
•
Make sure the player is not in A-B repeat status. Press A-B button to
cancel A-B repeat status
•
Is your disc dirty or warped? Clean or replace it.
The remote control does
not work.
•
Make sure there are no obstructions between the remote control and
the player.
•
Make sure the remote control is pointing at the player.
•
Make sure batteries are inserted correctly (check polarity).
•
Replace weak batteries.
Other possible causes for problems:
Static discharges or other external interferences can cause the DVD player to malfunction.
When this happens, disconnect the power plug from the mains socket and plug it back in.
If the problem persists, disconnect the device from the mains again and contact Customer
Service or a repair shop.
