Last update: 2022/07/26 12:27
accessory:display:vu_series:vu8m https://wiki.odroid.com/accessory/display/vu_series/vu8m
https://wiki.odroid.com/
Printed on 2022/11/20 23:20
E. MIPI DSI CONVERTER Board for M1 * 1EA
F. LCD Blacket Board for M1 * 1EA
G. U form Blacket Board for M1 * 2EA
Assembly guide
Please take special care when assemble it.
1.
2.
Mount the two U
Form Blacket boards
on the back of the
M1.
Two PM3.0x7 bolts
are fastened to the
two U Form Blacket
boards on the M1,
respectively.
Mount the U
Form Blacket
board with the
M1 on the back
of the 8“ LCD
module.
Fix it with 4 x
PM3.0x7 bolts.
3.
4.
Plug and fix the 31pin
60mm FPCB cable of
MIPI CONVERTER on
the ODROID-M1
The LCD and Touch
signals goes to the
converter board via
this FPCB.
You will need to
carefully undo the
clamp before
inserting the cable.
Make sure to press
the clamp in to
secure the ribbon in
place.
Check the two 31pin
and 6pin FPCB cables
connection.
LCD : 31pin / 60mm
Touch screen : 6pin /
3.5mm
Mount the M3*40
Support and
PM3.0x7 BOLT to
the bottom of the
U form Blacket
Board
the angle of
Vu8M can be
adjusted up to 70
degrees.
Software Setting
https://wiki.odroid.com/odroid-m1/application_note/software/display_vu8m
