3
Note: When downloading and uploading, please ensure that the computer and the
gateway are in the same network segment.
3.4.1.2.8. After completing the above settings, it could operate as fellow.
After the settings are completed, the Modbus TCP client can use the Modbus TCP
protocol to access the slave device 16DI which the station number is 1 though the gateway
IP address 192.168.1.254, the Modbus data communication port 502 and the slave number
1.?
3.4.1.3 Mapping mode configuration
3.4.1.3.1. Open the configuration software "ODOT MGCC Config".
Right-click on the configuration page of slave and select "Add
Device" ,then add "ODOT-S4E2".
