2
3.4.1.2.4.Select "COM1" , "COM2" ,"COM3" , "COM4".Take COM1
as an example .
Right click to select Add Slave, input "Slave Name", fill in "Slave Number" and slave
"Response Timeout" time, click "Confirm" to return. The station number of the slave
cannot be the same with each other and the device itself too. Range of the slave address
should be between 1 and 247 and the name of slave cannot be the same under the same
serial port too. The “Response timeout” time needs to be checked from the manual of the
device. It is recommended to set up above 500ms and click "Confirm”.
