10 Start-up
18 / 80
Instruction Manual Corvis® ST (G/72100/XXXX/EN 1019 Rev01)
10.3 Adju
s
tment
s
after an in-hou
s
e tran
s
port
Note
Equipment damage due to incorrect lifting
If the Corvis® ST is lifted only by the measure head, it can break off.
Grab the Corvis® ST from below and the head rest to lift it.
10.3.1
Device
s
et-up
Place the Corvis® ST on a level surface.
Place the Corvis® ST so that no direct light can effect the
measurement.
Avoid shocks and vibration.
Avoid contamination, high temperatures and humidity.
10.3.2
Unlock tran
s
port
s
afety device
During transport the Corvis® ST is secured with a transport safety device.
This must be unlocked before use.
Open the cover with the display.
Abb. 10-1: Open the cover with the display