OCULUS Corvis ST, Instruction Manual, Page: 15 / 86

4 Safety In s truction s
Instruction Manual Corvis® ST (G/72100/XXXX/EN 1019 Rev01) 9 / 80

Ensure that connections with non-medical devices are made
correctly.

Only use the power adapter listed in the packing list.

Establish an USB connection only with the OCULUS USB FS
MEDIsolator (Nr. 01 56920 00 010).

Use only a computer that meets the specifications given in this
instruction manual,
sec. 20, page 67 .

Note that an output voltage of maximum 5.5 V DC is supplied by a
device connected via USB.
Attention
Use of a multiple socket extension cord
Risk of personal injury or material damage caused by unsafe multiple
socket extension cord
If you use a multiple socket extension cord to connect the
Corvis® ST to the power supply, you must heed the following information:

Use an extension cord that complies with the requirements of DIN
EN ISO 60601-1: 20005, section 16.

Do not place the multiple socket extension cord on the floor.

Do not use more than one multiple socket extension cord.

Plug only the Corvis® ST and the computer that is being used with
the unit (if applicable) into the multiple socket extension cord.
If you are using a multiple socket extension chord it has to be supplied
with a isolation transformer.
If you are using a new computer for the Corvis® ST, you must have the
electrical safety checked. Call OCULUS Service for this purpose.
Electromagnetic Compatibility (EMC) / Cables
Risk of personal injury or damage to property due to electromagnetic in-
terference
Portable and mobile RF communications equipment can affect medical
electrical equipment
sec. 21, page 69 .

Make sure that portable and mobile RF communications equipment
do not cause interference.

Recommendation: Maintain a minimum distance of 4 m. If the
distance is shorter, you must ensure that the Corvis® ST functions
correctly.