10 Exporting Results via the Patient Data Management
Instruction Manual Binoptometer® 4P (G/59860/1016/en)
37 / 55
To export the data, press the [Export] button (2).
10.2 Importing Patient Data
If you receive patient data, for example, on a USB stick, you can import
these data. To do this, the version of the Binoptometer® 4P program
which you would like to import data into must match the version from
which the data has been exported.
Press the [Import] button. The following dialog is displayed:
☞
The default options for import and export of data are configured in the
"settings” field. See also
User Guide
.
Depending on the settings, you may not have to perform all of the
following steps (e.g. selection of the directory).
Select the option (5) which contains the source data ("Folder” or
"Single file (U12)”).
Press the [...] button. (1).
In the dialog box, select the directory or the file where the patient
data are located.
Confirm your selection with [OK] or [Open].
The patients and the associated examinations that are found are
displayed in the lower part of the dialog.
To import the data, press the [Import] button (3).
The data will then be available in the patient data management
system.
1
[...] button
4
Patient list
2
Previous examinations
5
Select data source
3
[Import] button
Fig. 10-2: Function "Import”
4
1
2
3
5
