Section 12 -
Wiring Diagrams 110-120V Motor
Please Note:
Do not wire motors in parallel.
* These wiring diagrams
are for Access XL
screens with motor on
audience left
(standard)
,
and fabric unrolling
from the back of the
roller
(standard)
.
Connecting Switch
to Motor with Internal
Low-voltage Controller
Single Station Control
White (Common)
Black (Down)
Red (Up)
Green (Ground)
Control
switch
Blue
Black
Red
Location of key
operated on-off
switch if furnished.
To 110-120V Line
Single gang box by others.
Min. 4" x 2
1⁄8
" x 1
7⁄8
" deep.
(102mm x 54mm x 48mm)
Dashed wiring
by electrician.
110-120V MOTOR
Internal Screen Wiring
STANDARD
Multiple Station Control
White (Neutral)
Green/Yellow (Ground)
Internal Screen Wiring
Black
Dashed wiring
by electrician.
To 110-120V Line
Wall Switch,
RF or IR
Receiver,
or integrated
control system.
RJ-9
connector
Data Cables
Single Station Control
White (Neutral)
Green/Yellow (Ground)
Black
Internal Screen Wiring
Dashed wiring
by electrician.
Wall Switch,
RF or IR
Receiver,
or integrated
control system.
RJ-9
connector
Data Cable
To 110-120V Line
110-120V MOTOR AND QUIET MOTOR
(Internal Low-Voltage Controller for ILT motor)
Back of
Wall Switch
Back of
Wall Switch
Data Cables to
switches or
additional motors
TO MOTOR
TO MOTOR
ILT Data Cable Connection
Back of
Wall Switch
Back of
Wall Switch
Dry Contacts
OR
MOTOR
DATA CABLE
MOTOR
DATA CABLE
Please Note: This Splitter/Jack is located
inside the junction box of your screen.
Please Note: 5V DC must
be connected to set limits
using the wall switch.
Dashed wiring by electrician
Factory wiring
Low-voltage wiring by others
IR Eye Input
Low-Voltage
Trigger
4-28 VDC
RS232/485
Inputs/Outputs
Receiver
Button
3 Button Wall Switch
DOWN - Black
COM - White
UP - Red
Wall Switch
Electrically Straight
Data Cable to more
LVC-IV modules.*
FU
SE -
3.1
5 A
M
P
25
0 V
AC
5x
20
m
m
To
110-120 VAC
Line
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 110V-120V AC-Hot
Black-to 110V-120V AC-Hot
White-Common to screen & 110V-120V AC Neutral
Green/Yellow (Ground)
White (Common)
Red (Up)
Black (Down)
INTERNAL SCREEN WIRING
Green/Yellow
(Motor Ground)
GND
Location of key
operated on-off
switch if furnished.
TO
: M
OT
OR
LE
AD
S
*A maximum of six (6)
LVC-IV modules can
be linked together.
L1
N
External LVC-IV - Single or Multiple Projection Screen Wiring Diagram
Internal LVC-IV - Single or Multiple
Projection Screen Wiring Diagram
Black-to 110V-120V AC-Hot
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 110V-120V AC-Hot
White -Common to screen & 110V-120V AC Neutral
N
TO
: M
OT
OR
LE
AD
S
3-Button Wall Switch
DOWN - Black
COM - White
UP - Red
Electrically Straight
Data Cable to more
LVC-IV modules.*
*A maximum of six (6)
LVC-IV modules can be
linked together.
FU
SE -
3.
15
AM
P
25
0
VA
C 5
x2
0m
m
Dashed wiring by electrician
Factory wiring
Low-voltage wiring by others
To
110-120 VAC
Line
Green/Yellow (Ground)
White (Common)
Red (Up)
Black (Down)
INTERNAL SCREEN WIRING
Green/Yellow
(Motor Ground)
Location of key
operated on-off
switch if furnished.
IR Eye Input
Low-Voltage
Trigger
4-28 VDC
RS232/485
Inputs/Outputs
Wall Switch
L1
GND
Receiver
Button
WIRING DIAGRAM -
Internal LVC-IV
(Low-Voltage Control Module)
Internal LVC-IV - Single or Multiple Projection Screen Wiring Diagram
External LVC-IV - Single or Multiple Projection Screen Wiring Diagram
110-120V Motor with Internal
Low-Voltage Controller
page 8 of 8
Access XL E and V
