Title: User Manual SmartDiag2GO GD201-O
Rel: 1.1
Pag.
5
a
5
CE CONFORMITY
“Octo Telematics Spa, via Vincenzo Lamaro 51
- 00173 Roma, declares that this Telematic device is compliant to the European law
2014/53/UE. The complete text of the declaration for UE conformity can be accessed to the following URL:
www.octotelematics.com/certifications.
”
The working frequencies of the device are reported in the following table:
Band
Max Power
GSM900（TX：880~915；RX：925~960）
33dBm
GSM1800（TX：1710~1785；RX：1805~1880）
30dBm
LTE Band 1（TX：1920~1980；RX：2110~2170）
CAT M1：20.7dBm
NB-IOT：21dBm
LTE Band 3（TX：1710~1785；RX：1805~1880）
CAT M1：22.5dBm
NB-IOT：22dBm
LTE Band 8（TX：880~915；RX：925~960）
CAT M1：20.7dBm
NB-IOT：21dBm
LTE Band 20（TX：832~862；RX：791~821）
CAT M1：20.7dBm
NB-IOT：21dBm
LTE Band 28（TX：703~748；RX：758~803）
CAT M1：20.7dBm
NB-IOT：21dBm
BT（2402 - 2480）
3dBm
VEHICLE APPLICATION RULES
The instructions exposed in this manual are not referred to a particular type of vehicle, but they are applicable to every kind of
vehicle.
Every information provided by Octo on eventual Brand and Model is to be considered as a suggestion.
The installation, positioning, fixing and connection of power lines, and eventual removal activities, must be performed professionally.
The professional installer must verify, under his own responsibility the best way to install the device on the relative vehicle.
The professional installation of the device in the vehicle do not void the vehicle’s warranty. In case of need, it is possibl
e to download
the warranty document in the “documents” area in the Installer’s Octo web profile.
Inversely, if not correctly installed, the device could void the Device’s warranty with Installer’s responsibility involved.
End of life disposal warning: When the unit has come to the end of its life, dispose of it in accordance with local regulations.
CAUTION BATTERY
Do not substitute the internal battery of the device since there is the risk of explosion if the battery is replaced by an incorrect type
of battery. The disposal of the battery into or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or in the leakage of
flammable liquid or gas. A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable
liquid or gas.
GENERAL REMARKS
–
SAFETY AND LIMITATIONS OF USE
Opening the device may lead to electronic components to be exposed causing electrical shock to the user.
Do not install the device in environments outside the operating temperature range -20°C to +75 °C. Overheat may cause extreme
heat or fire. Connecting the device to an incorrect power supply may result in safety related EMC issues. Use a power supply
compatible with rated voltage 12 V and rated current 500 mA.
Do not use the device in environments in which it may interfere with safety related equipment, like hospital and aircrafts.
Do not use the device in conditions not compatible with IP51 grade. The water and dust can cause short circuit and damage of the
device. Do not use the device in an explosive atmosphere environment. The device may generate sparks that will cause explosion.
Excessive pressure may broke the device causing injuries to the user.
