Title: User Manual SmartDiag2GO GD201-O
Rel: 1.1
Pag.
2
a
5
THE DEVICE
DESCRIPTION
SmartDiag2GO is a telematic device equipped with Cellular and GNSS modules with internal antennas, gyroscope, accelerometer and
Bluetooth tranceiver.
WARNINGS
Please refer exclusively to the information indicated in this manual for installation activities.
The device was designed to be installed inside the passenger compartment room only.
Please do not remove the warranty seals or attempt to open the device or its accessories.
Please do not attempt to modify or use the device outside of the scopes foreseen
Avoid device contact with water and dirt (dust)
The manufacturer declines every responsibility for damages caused to goods or persons due to a misuse of the device.
DEVICE POSITIONING
Your enclosed device plugs into the On Board Diagnosis (OBD) port of your
vehicle (included in all 2001 or newer vehicles).
Please follow the instructions below to install the device.
a)
Locate the OBD port in your vehicle. This port is usually located under the dashboard
on the driver’s side and may have a cover –
the picture shows the typical vehicle OBD
port location.
b)
The OBD socket of the vehicle can be easily removed from its mounting position, so to free the bracket to accept the OBD
socket of the “OBD Replicator Cable” provided in the package.
In this way the result is to have the OBD port of the vehicle exactly in the original position, and
free for diagnosis and maintenance, thus allowing to have the Octo device installed in the best
position possible (hidden to sight) and connected to the vehicle
NOTE
: the device initialization procedure work better if the vehicle is outside in an open area
with a good Cellular signal and satellite reception.
