9
OSD3358-SM-RED
– User Guide
Rev. 1.0 9/19/2017
Octavo Systems LLC
Copyright 2017
2. LED D1 will turn on immediately after power is applied to the board.
Figure 5: RED board boot up - LED D1 ON
3. LEDs D4
– D7 turn on in the sequence indicated below indicating Linux is booting.
Figure 6: RED board boot up - LEDs D4 - D7 turn ON
NOTE:
Notes on connecting the PMIC_TS input of the SiP can be found in "Battery pack
temperature monitoring" section of the TPS65217C PMIC datasheet. If the battery does
not have a temperature output, the battery temperature monitoring mechanism of the PMIC
can be bypassed by connecting a 10KOhm resister between PMIC_TS (TP7) of the board
and GND.
