Octave V 80 SE, Owner'S Manual

Page: 7 / 48

8
2. SAFETY INSTRUCTIONS
2.1. Before you begin
2.1.1. In case of emergency: disconnect the plug from the mains supply
Never use an amplifier that is damaged or faulty. Make sure it has been labeled as defective and
that it cannot be used until it has been repaired by a qualified service engineer. Make sure that
there is easy access to the IEC socket and power cable.
2.1.2- Do not open the case
There are dangerously high voltages and hot tubes inside this equipment. To avoid a burn or the
risk of electric shock, never allow anyone except qualified personnel to open the case or remove
the grill.
2.1.3. Service and maintenance
For reasons of safety, please ensure that servicing, repairs and other modifications to OCTAVE
equipment are carried out only by a qualified technician. Defective fuses should also only be
replaced by a qualified technician. Always replace fuses with ones of the same type and rating. If
your amplifier requires servicing, please ship or take your equipment directly to OCTAVE or to one
of our authorized service centers.
2.1.4. Symbols and terms used in warnings
The following warnings, symbols and terms are used in this document in compliance with the
American National Standard ANSI Z535.6-2011:
The general danger symbol, in conjunction with the terms CAUTION,
WARNING, or DANGER, warns of the risk of severe injury.
The triangle symbol with the lightning bolt warns of non-isolated, dangerous
voltages inside the case and of hazards posed by electrical shocks. Follow all
subsequent instructions to avoid injury or death.
ATTENTION Indicates a danger that could lead to damage or destruction of the device.
CAUTION Indicates a danger that represents a low or medium risk of injury.
WARNING Indicates a danger that could lead to death or severe injury.
DANGER Indicates a danger that will result in death or severe injury.
Warning format
WARNING TERM
Type and source of danger
Consequences of ignoring the warning
► Action needed to avoid danger