6
Zone Receiver (RX) Overview:
A Zone Rx unit is positioned close to your Display device and
connected to the Octava Matrix via 2xTwisted Pair (CAT5 or CAT6)
cables. Connect the Rx unit to your Display device using a short High
Speed HDMI cable.
Before you begin your system installation please ensure you identify
which type of Octava Rx unit you are working with
– PoC, non-PoC.
Refer to section:
“Identifying Zone Receiver (RX)”
PoC
(Power over Cable) Rx units are powered from the Matrix
non-PoC
Rx units require a local 5V power supply
Item
Description
16
Power Indicator
indicates Rx is receiving power
17
RJ-45 Input (1-2).
connect to CAT6 Out (-1 -2) on Zones
A-D of Octava Matrix
18
HDMI Out to HDTV
connect to HDTV using High Speed
HDMI cable
19
IR receiver
connect Octava supplied IR Receiver
cable.
16-Power Indicator
19- IR receiver input
18- HDMI Out to HDTV
17- CAT 6 Input