10
Installation:
Step
0
Disconnect ALL cables from the MATRIX / Zone Receivers
Power OFF all HDTV/Displays/Audio Receivers
Power OFF all Video Sources
Power OFF Matrix
Power OFF Zone Receivers
1
Verify that the Configuration Switch
is set to the factory default mode.
2
Connect HDMI sources to
HDMI IN 1-4
Connecting Output with HDMI
cable
3
If you are connecting with HDMI
cable:
Connect HDMI cable to
HDMI output A and HDTV
Connecting Output with Ethernet
cables
4
Verify that the Zone Receiver you
have supports
PoC
(See page 7)
If the Zone Receiver has PoC
proceed to step 5.
IF your Zone Receiver are
non PoC
proceed to
Alternative steps A1-A5.
(Skip to page 12)
5
Connect the 5VDC power supply to
the DC/5V port.
HDMI Out
CONTINUE on Next Page