16
Changing EDID mode:
It is recommended to keep the EDID in the factory default MODE1.
If necessary, you may set to different EDID mode by following these
instructions or view EDID Programming Instructions (video demo) at:
www.octavainc.com/support and updates.html
If you are unsure or need assistance, please contact us.
Step
Action
Notes
1
Disconnect all
sources and display
from Matrix
2
Set switch 1,2,3,4,5
to down position as
shown
3
Set the EDID to the
mode desired.
(MODE 2 shown.)
See page 15
“EDID
Configuration”
for other EDID
modes
4
Reset Power to the
Matrix by
disconnecting the
power and
reconnecting power.
5
The LED will now
indicate the EDID
Mode that you will
program.(mode 2
shown)
1= mode 1
2= mode 2
3= mode 3
4= mode 4
5= mode 5
flashed
CONTINUE on Next Page