4
T. +49 711 77003-0
F. +49 711 77003-53
www.octanorm.com
OCTANORM
®
Germany
Head Office
Raiffeisenstraße 39
70794 Filderstadt
7. TYPICAL APPLICATIONS
Application Circuit 1: Single color (DC plug 2.1/5.5)
8. ABOUT RF CODE
The biggest advantage of this system is that it can not only solve the cabling problem in engineering wireless-
ly, but also realize a wired-like operation experience. In order to facilitate the early testing and debugging of
the project, the factory status of the receiver is normally unpaired and each remote controller has a unique
code value. The user should perform the matching work of the remote controller and the receiver during
the installation of the project to avoid the mutual influence of the radio frequency remote control technology
during the later use.
Please pay attention to the following 3 points before operation:
All equipment in the complete system after installation should have a unified and unique code value, so
as to achieve the security and stability of the system.
The receiver can only store one code value and cannot be overwritten. Before learning the new code
value, it is necessary to clear the original code of the receiver; the remote controller can only save one
code value but can be overwritten and can also restore the factory settings. In order to facilitate the later
maintenance, the three components that may be involved in the system (including receivers, handheld
remote controllers, and panel remote controllers) can realize mutual learning of code values.
Since the receiver performs code value learning in the power-on state, batch-operation is available
(power-one the all receivers which will be in same zone, and operate the matching/clearing the RF code
all of them at the same time)
. And in order to avoid confusion in the area, it is recommended that each
area has an independent power switch so that the power of other areas can be easily cut off when
the code is being operated.
M 1497-4 DIMMER FOR WALLWASHER
User Manual M-OWP 1.1