OCTANORM M 1497-4 User Manual Download Page 3

3

T.  +49 711 77003-0 

F.  +49 711 77003-53

[email protected] 

www.octanorm.com

OCTANORM

®

 Germany

Head Office 

Raiffeisenstraße 39  

70794 Filderstadt

Button control function

1. Short pressing to switch on/off the light in any time.
2. Long-pressing during the controller in working state, the output light brightness, just release press when 
you get the correct brightness.

6. TOUCH REMOTE

Adopts RF full touch control, with one dimming ring and 5 function buttons.
Tips: Without any operation more than 20 seconds, the touch remote will enter the sleep state, please 

SHAKE

 

the remote to wake up it before the next using.

NAME OF KEY

INSTRUCTION

REMARKS

Off

Off in any time

On

On in any time

Mode

The mode will go to next, when you 
touch the key each time

2 modes in total: fade or flash (speed is 
adjustable, brightness is unadjustable)

Speed/Brig

The speed/brightness will +1, when 
you touch the key each time

Speed for dynamic modes, brightness for 
static modes

Speed/Brightness -

The speed/brightness will -1, when 
you touch the key each time

Speed for dynamic modes, brightness for 
static modes

Dimming Ring

For brightness selection

M 1497-4 DIMMER FOR WALLWASHER

User Manual M-OWP 1.1

Summary of Contents for M 1497-4







Reviews: