6
6. Attach console back covers
a. Position console cover (C) or (D) behind console plate; slide
tabs of console cover into slots in LCD-TV mounting arm
(A).
b. Insert two (2) of the Phillips screws provided in the console
box of the xRide elliptical through the back of the console
covers and into the console; tighten to secure console back
and console to console plate.
c. Repeat steps (a) and (b) for the remaining console cover (C
or D).
7. Attach media controller to footrest
Follow the instructions and hardware provided with your
media controller to attach it to the footrest tube.
5. Connect console
Connect all cables to their corresponding connections on
the back of the console, according to the diagram at right.
Hint: it is easiest to start from the bottom when
connecting these cables.
Tuck the cables into the mast
and rest the console on the console plate.
Ground
(green wire)
Console to Base
Keypad
Reserved–Software Updates
Heart Rate
CSAFE
(Upper Board)
Fan
Stationary Handlebar
Buttons