6
USER (CLUB) SETTINGS
Many of the standard features and controls of Octane Fitness units can be customized to fit your personal
preferences or workout environment. In just a few simple steps, you can set up the machine to skip the Warm-Up,
count down your workout time (instead of counting up), limit the maximum workout time, display units in English
or metric, mute the console beeps and more. All of these adjustments are easily completed and are saved as the
new standard for the machine—you don’t need to reset them for each use.
To access these functions, press and hold both the Level Up (+) and Level Down (–) keys for three seconds, or until
you hear a beep. The following customizable functions are displayed in sequence in the LCD; use the Enter key to
toggle through the available options (shown in the matrix display) for each function, and press any Up (+) or Down
(–) to select a setting and move to the next function. To exit without changing any values, press Pause Clear twice.
Available functions may differ from those listed below, depending upon your software version.
Warm-Up
This feature may be turned “ON” (to include a 3-minute warm-up in each workout) or “OFF”.
The factory default setting is “ON”.
Clock Direction
The cross-trainer can track workout time by counting “UP” or “DOWN”. The factory default
setting is “UP”. Quick Start
always
counts down.
Max Workout
Time
You may set the maximum workout time for users to the value that is best for your environment.
The factory default setting is “OFF”, allowing users to use the machine for as long as they
would like without reset on goal-based programs. Press the Enter key one time to move
from”OFF” to ten minutes (10:00) , then press and hold ENTER to scroll to any value between
ten miniutes (10:00) and 120 minutes. (The setting rolls back to “OFF” if you scroll past 120
minutes). Press the Up (+) or Down (–) key to save the value you desire.
Note:
Programs with
a time value as part of the program setup are always limited to 120 minutes maximum time,
even if the Max Workout Time is “OFF”.
Default
Workout Time
Default Workout Time governs the standard value that users see when they program a
workout with a ‘time’ setting; that is, a goal-based program. The factory default setting is
30 minutes. Default Workout Time may be set to any value between ten minutes (10:00) and
the current Max Workout Time setting. If Max Workout Time is set to “OFF”, Default Workout
Time is 120 minutes. Press and hold ENTER to scroll through in one-minute increments to the
value you want, then press the Up (+) or Down (–) key to save the value you desire.
Unit Type
You may choose to have the weight and distance units displayed in “ENGLISH” (pounds and
miles) or “METRIC” (kilograms and kilometers). The factory default setting is “ENGLISH”.
Beep
You may turn the console sounds “ON” or “OFF”. The factory default setting is “ON”.
Language
Choose one of several languages options for the console display. The factory default setting
is “ENGLISH”.
TV
Set to “ON” if you have a Personal Viewing System (PVS) accessory attached. The factory
default setting is “OFF”.
900 MHz
Set to “ON” if you have a 900 MHz audio accessory installed. The factory default setting is
“OFF”. (Available in some software versions.)
Exit
When EXIT is displayed in the LCD, press Enter to leave User (Club) Settings. All of your
selections will be saved and become the new standard settings for your machine. They may
be changed at any time by repeating these setup procedures.
