background image

11

 

12.   set user preferences

a.  Press and hold 

both the Up Arrow (

) and Down Arrow (

keys  for  three  seconds,  or  until  you  hear  a  double-beep. 
Working with the owner of the unit, use the Up Arrow (

or Down Arrow (

) key to step through the customizable 

functions:  Warm-up  (On/Off),  Clock  Direction  (Up/Down), 
Max Workout Time, Unit Type (English/Metric), Beep (On/
Off), and Brightness. Use the Enter key to toggle through 
the available options for each function, and press the Up 
Arrow (

) or Down Arrow (

) key to select a setting and 

move  to  the  next  function.  To  exit  without  changing  any 

values, press Pause Clear twice.

 

More detailed User Set-up information can be found in the  

PRO370 Operations Manual.

m o v i n g   t h e   P r o d u c t

It is safest to move the product to its installation location in its shipping carton. It may be easier to move the 
product into your home after you remove it from the packaging, but be careful not to hit any walls or doors.  

The PRO370 features transport wheels on the front of the unit. Be careful when moving from one surface to 

another, such as hardwood floor to carpet.

Note:

  If you need to pick up your elliptical there are hand placement slots under the front shroud. Please take 

caution when lifting. The elliptical weighs 280 lbs. when fully assembled.

Tip:

  When using the front transport wheels, it is easier to pull the unit rather than push it.

Summary of Contents for Pro 370













Reviews: