Octane Fitness AirRide, Assembly Manual

Page: 5 / 24

5
SAFETY WARNING LABELS AND SERIAL NUMBER
Safety Warning Labels and Serial Number
• When the machine is put in a Studio/Institutional environment, it can only be used in areas where access and control
of the machine are managed and supervised by approved sta
ff . The degree of supervision and oversight depends
among other things on the speci fi c setting in which the machine is placed, security of that environment, and familiarity
of the users with the equipment. Because others will have used the machine previously, make sure the seat, pedals
and handlebars are correctly adjusted, tightened and secured.
• Since this machine operates with a fi xed gear, do not back, or reverse, pedal. Doing so may loosen the Pedals, which
could result in damage to the machine and/or injury to the user. Never operate this machine with loose Pedals.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
• This bike cannot stop the Pedals independently of the Resistance Fan. Reduce the pace to slow the Resistance Fan
and Pedals to a stop. Do not dismount the bike until the Pedals have come to a complete stop. Be aware that the
moving Pedals can strike the backs of the legs.
• Children should be supervised to ensure that they do not play with the appliance.
Product specifi cation
Serial number
FCC Compliance
!
Changes or modi fi cations to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
The power supply complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This power supply has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment o
ff and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di
ff erent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.