19
When done with your workout, reduce the Resistance Fan speed until the machine fully stops.
This bike cannot stop the Pedals independently of the Resistance Fan. Reduce the pace to slow the
Resistance Fan and Pedals to a stop. Do not dismount the bike until the Pedals have come to a complete
stop. Be aware that the moving Pedals can strike the backs of the legs.
Locking the Fan Assembly / Storage
When the machine is not in use, be sure to lock the Fan As-
sembly with the Transport and Immobilization Strap. The fan
assembly should be locked for storage of the machine.
For safe storage of the machine, remove the
batteries and install the Transport and Immobilization
Strap to secure the Resistance Fan. Place the
machine in a secure location away from children and
pets. Be aware that the Pedals, Handlebars and
Resistance Fan are connected and when any of
these parts move, the others do as well.
To lock the Fan Assembly:
1.
Move the Pedals so that one Crank Arm is as close as
possible to the Seat Post.
2.
Wrap the Transport and Immobilization Strap (T) around
the Crank Arm and the Seat Post and put the end of the
strap through the metal ring. Tighten the strap to prevent
movement of the Pedals and secure the strap.
Power-Up / Idle Mode
The Console will enter Power-Up / Idle Mode if any button is pushed, or if it receives a signal from the RPM sensor as a
result of pedaling the machine.
Note:
The Console will display the battery indicator if the battery level is 25% or less.
Auto Shut-O
ff
(Sleep Mode)
If the Console does not receive any input in approximately 2 minutes, it will automatically shut o
ff
. The LCD display is o
ff
while in Sleep Mode.
Note:
The Console does not have an On/Off switch.
Manual Workout
The Manual program lets you start a workout without entering any information.
1. Sit on the machine.
2. With the Console in Idle Mode, push the START/RESUME button to start the workout program, and start to pedal.
3.
To pause the workout and see your metrics, push the STOP/RESET button one time. Push START/RESUME to
continue.
4.
When done with your workout, push the STOP/RESET button two times to end the workout.
T
Summary of Contents for AirRide
Page 24: ...TM 8030294 Rev A ...
