manualshive.com logo in svg

Octagon 5554, User Manual

Share
Download
Octagon 5554 User Manual Download Page 9

Preface – 1

PREFACE

This manual is a guide to the proper configuration, installation,
and operation of your 5554/5558 Quad/Octal Serial Card.  The
5554/5558 expansion card is part of the Octagon Micro PC system.
It is designed to be used with any other Micro PC Control Cards.
You can use your 5554/5558 card in conjunction with other Micro
PC expansion cards, tailoring your system for a wide variety of
applications.  The 5554/5558 card can also be used in an IBM-
compatible PC.  Micro PC cards are too tall to fit in an XT, but will
fit in AT industrial size and other AT-size cases.  All Micro PC
products are modular, so creating a system is as easy as selecting
and plugging in the products you need.

CONVENTIONS USED IN THIS MANUAL

1.

Information which appears on your screen (output from your
system or commands or data that you key in) is shown in a
different type face (note: the line breaks may not match those
on your screen, but the message will be similar).

Example 1:

Octagon 5025 ROM BIOS Vers X.XX

Copyright (c) 1992, 1993 Octagon Systems, Corp.

All Rights Reserved

Example 2:

Press the <ESC> key.

2.

Italicized refers to information that is specific to your particu-
lar system or program. For example:

Enter  filename

means enter the name of your file.  Names of other sections or
manuals are also italicized.

3.

Warnings always appear in this format:

The warning message appears here.

WARNING:

Summary of Contents for 5554





































Reviews:

No comments

Brands by name

Popular brands

Load more brands