User’s Manual for OCBS-D007 Stocktaking Handheld Terminal Page 5 of 30
5
by press key 1 successively; while a blank or an exclamation point appears in turn by
press key
0.
In the quantity line –press F3 to enter negative number and star key to enter decimal
point.
2.2 Basic Operation
2.2.1 Bootup
Make sure the battery is properly loaded and fully charged. Long press the SCAN/ON
key until a beep sounds to indicate the startup of the Stocktaking and enter the welcome
page.
2.2.2 Shutdown
Hold down the OFF key for 1.5 seconds to turn off the Stocktaking handheld terminal.
2.2.3 Status Bar
Main Menu
Figure 2-2
1
．
Signal strength
2
．
Time
3
．
Memory used
4
．
Battery level
2.3 Main Functions
2.3.1 Receiving/Shipping/Cycle Count/Damage/Replenish
Choose one menu item then press OK to enter it. Press Left Arrow key to switch between
REAL-TIME and SAVE mode, while Right Arrow key to select manual or auto mode.
Under the manual mode, the Up Arrow key and Down Arrow key are activated for
entering batch number and quantity, while other information is automatically withdrawn
from the downloaded item file. And the operation status is shown right below.
