Bracket Assembly
Mount bracket Assembly, Wall Mounting:
Step one:
Locate the (2) Heater Arm Mount Brackets and install them on
each end of the Heater using the (2) 1/4-20 X 1/2” SS Hex Bolts as shown
below.
7
NOTE:
Use only the mounting brackets provided by the manufacturer.
heater must be leveled only on a
Horizontal Axis
but can be angled to a
maximum of 30 degrees in reference to the floor.
DO NOT
mount the
heater on a vertical axis.
DO NOT
modify brackets. Such installation is
considered unsafe and improper and will automatically
VOID
the prod-
uct’s warranty.
MOUNTING
HEIGHT
8-9 ft.
COLD/
BREEZY
6 ft. X 6 ft.
MILD
8 ft. X 8 ft.
WELL
PROTECTED
10 ft. X 10 ft.
Desired heating area coverage