BA_OLW I OTE3_SW5x_EN_20160815_V2
16 / 48
8 Assembling the cladding
8.1 Sealing the appliance
Before you assemble the cladding, you must seal the
appliance by adhering tape in order to avoid conden-
sate in the appliance during all operational conditions.
The tape is in the cladding.
Fig.19: Seal the appliance inside (1)
► Tape over the hole in the bottom of the frame on the
left hand side with the fabric tape. The tape is in the
accessory "heat insulated air hose".
Fig.20: Seal the appliance inside (2)
► Hang the foil with the pre-cut
holes on the hooks on the appliance.
Fig.21: Seal the appliance inside (3)
►
Remove the support layer of the tapes on the frame
and on the foil.
► Fix the foil by applying it to the basic appliance.
► Seal the openings in the area of the hooks
with fabric tape.
8.2 Assembling the insulation
8.2.1 Insulation mats
Fig.22: Insulation mats
► Close up the conduit between the heat pump and
the function module with the insulation mat supplied
after connecting up the hydraulics and electrics.
Summary of Contents for OLWI 9
