Document UT-MT-0693_EN
Page 9 of 33
Edition 15/01/2020
Supersedes edition 08/01/2019
LED INSET HELIPORT LIGHT LHI
INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE
with FAA AC 150/5345-26 for very quick coupling with the receptacle mounted on the
shallow base.
The fixture is 203 mm in diameter and 85 mm (+ 18.5 mm for plugs) high; the
protrusion above the ground is less than 6.35 mm.
An identification data label is externally applied over the lower cover (Figure 2
–
n°2).
Moreover, to identify quickly the beam colour, the letter “A” of the dome in front of
the window is painted in the same colour of the light beam.
1.
Lower cover
2.
Identification label
3.
Grounding cable hole
4.
Le
tter “A” and “B” for
cable lead identification
5.
Cable lead entry
Figure 2
–
Lower Cover Outside View
The same colour painting is provided outside on the lower cover.
See
“Complete P/N identification”
figure for P/N information.
All hardware is made of stainless steel.
1.
Cable lead with plug
2.
Leak test valve
3.
Letter “A” and “B” for
cable lead identification
Figure 3
–
Lower Cover Inside View
