Document UT-MT-0812_ENG
Page 25 of 28
Edition 19/05/2016
Suspended edition 18/12/2014
ELEVATED LEDs A APPROACH, THRESHOLD, THRESHOLD WING BAR, RUNWAY END AND STOP BAR LERA
INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE
Figure 23: bulkhead connector internal body and nut
•
insert the new cable leads with plug and the grounding wire through the bulkhead connector nut,
and the through the grommet with three holes. Pull the wires for approx. 40 mm in respect to the
grommet (fig. 24).
Figure 24: wires pulled through the grommet
•
place the grommet complete with wires inside the bulkhead connector internal body (fig. 25)
Figure 25: grommet placed inside the internal body
•
screw, only one turn, the nut to the body. Fit-in the wires of the cable lead into the terminals
1
and
2
and the grounding wire
into the terminal with the
grounding mark
(fig. 26-27).
Wires L=40
mm
