Document UT-MT-0812_ENG
Page 17 of 28
Edition 19/05/2016
Suspended edition 18/12/2014
ELEVATED LEDs A APPROACH, THRESHOLD, THRESHOLD WING BAR, RUNWAY END AND STOP BAR LERA
INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE
Insert the bulkhead connector nut-body assembly through the special support with vertical aiming
adjusting device (Fig. 12).
Figure 12: support with vertical aiming adjusting device
Tighten the nut-body assembly to the fixed section of the bulkhead connector mounted on the
fixture body, in this way providing the electrical connection (tightening torque: 5 Nm) (Fig. 13). Use
special tubular wrench 22 mm for bulkhead connector tightening (P/N. 798.0006).
Figure 13: tightening torque
Complete the mechanical assembly of the fixture. Unscrew from the body the bush with screw,
provided for the vertical aiming adjusting device (fig. 14).
