OCEM IRM, Operation And Maintenance Manual

Page: 6 / 32

GENERAL
INFORMA
TION
UT-MT-0930_1.3_220421 (EN)
Operation and Maintenance Manual
IRM
6
1.2 Manual reference guide
This document contains all the information related to the equipment and describes the procedures to follow during
the installation of the product and during ordinary maintenance. The document is indented for all operators that
must intervene on the equipment.
The precautions provided in the manual are always preceded by a symbol as illustrated below:
Indicates the warnings, the notes, the suggestions and other points on which is intended to
draw the attention of the reader.
Indicates the operations to be carried out mandatorily or the informations which should be
carefully watched to avoid possible risks.
Indicates particular risks connected with the power supply. Are reported the operations to
be carried out mandatorily or the informations which should be carefully watched to avoid
possible risks.
These precautions safeguard the personal security of everyone who works and/or are present in the buffer area
of the equipment and of the relative supply circuits.
The failure to comply with the instructions (in particular those preceded by danger, warning, caution
precautions) can cause serious injury or death.
1.3 Safety instructions
CAREFULLY READ THIS DOCUMENT.
The improper use of the equipment or the failure to comply all the precautions indicated
implies life danger and serious injury to persons and damages to things.
HAZARD OF ELECTRICAL SHOCK, EXPLOSION OR ELECTRIC ARC
Carefully read the enclosed documentation before installing or starting to use the equipment.
Do not install the equipment until the completion of all construction works required to carry
out the work.
DO NOT OPERATE ON POWERED CIRCUITS
Do not carry out any operation on powered circuits.
Before every access, inspection or intervention on the equipments, ensure to have switched off the
equipment by opening the main power switch and by removing the supply from the unit by opening
the power switch at the beginning of the line.
The failure to comply all the precautions indicated implies life danger and serious injury to
persons.
RESIDUAL ENERGIES
Always wait for the discharging time (at least 5 min) before operating on the equipments.
Check the complete de-energization of the equipments before accessing the potentially active
parts. The failure to comply all the precautions indicated implies life danger and serious
injury to persons.
IN CASE OF MULFUNCTION OF THE EQUIPMENTS
Do not leave the devices who have expressed evidence of deterioration or of malfunction.
Disconnect the energy sources and proceed as soon as possible to repair/replacement of
devices.