DEN.Booth Assembly Instructions
CL
2
00
2
00
250
19.
Using the allen key, attach the worksurface fixing brackets (X&Y) in the positions shown above - leaving them loose at this stage. Each small bracket (Y) uses 1x M6x20mm socket
button head machine screw (W) and each large bracket (X) uses 2 xM6x20mm socket button head bolts (W). Use the top holes/slots for a 730mm worksurface height and the
bottom for a 750mm worksurface height.
When fixing the small brackets (Y) to the structure, make sure to pass the bolts through the top 7mm hole and not the slot.
Y
Small Worksurface
Fixing Bracket
X
Large Worksurface
Fixing Bracket
W
M6x20 Button
Head Bolts
750mm Worksurface
height
X
Y
730mm Worksurface
height
4mm Allen Key
W
W
W
W
W
W
Y
Small Worksurface
Fixing Bracket
X
Large Worksurface
Fixing Bracket
FRONT
BACK
FRONT
BACK
17.
Attach the 650w/850w (module dependent) back panel (C-2) of sub-assembly C to
the 3-way junction (D) (see step 1 for method).
18.
Tap the top of the 650w/850w (module dependent) back panel (C-2) with a cushioned
mallet to fully engage as shown above. Tie the 650w/850w (module dependent) back panel
(C-2) to the 3-way junction (D) using a bottom connector link (Z) (see step 2 for method).
If fitting worksurfaces continue to step 19.
If fitting seating please see SASS-0102.
Z
Bottom Connector
Link
Sub-assembly C
DWG No: SASS-0040
Revision: B (09/12/15)
Drawn by: Jkb
Drawn date: 06/01/15
