10
The system ingeniously designs the light sensitive area as the place where the
scattering of particles occurs. When the particles pass through the light sensitive
area formed by the focused laser, the light scattered by particles is collected by the
Micro-Photoelectric detector on the detection window. The Micro-Photoelectric
detector quickly and accurately converts the received light intensity signal into the
equal voltage signal, and the signal is dense. Degree corresponds to the unit
concentration value of particles. After coefficient conversion, the dust
concentration value is output in real time through data interface. With cyclone
physical cutter and PID real-time temperature control system, the response of
humidity to test results can be effectively reduced. Combined with sheath gas
protection system, the influence of test samples on optical elements is effectively
prevented.
3.1 Introduction of usage
The main interface includes real-time data display, device networking status,
real-time clock and some function buttons.:
3.2 Data check and export:
From the main interface choose the history data, you can check the history data;
switch to check every gas type data, previous or next can view more data:
