ELECTRICAL INSTALLATION
CONNECTING LIGHTS:
Example: EXPLORE Series E6 & E7 DMX
For the straightforward connection with the Explore E6 & E7 lights, use Explore E6 & E7 Control Link Cable (not provided,
see full manual Appendix 9.5). Connect the male plug of the cable with the OceanBridge DMX OUT port and connect the
other end to the first light in the DMX chain. Ensure to terminate the last device in the DMX chain with the DMX terminator
(optional).
Ocean LED Marine LTD / Tel +44 (0) 1455 637505 / [email protected]
Ocean LED USA LLC / Tel +1 954 523 2250 / [email protected] /
www.oceanled.com
Specifications are subject to change without notice.
Please ensure you have read the full Installation Manual before fitting this product.
MFD Install – Ethernet Connection
Connect the OceanBridge unit to the MFD using the Ethernet cable (not provided). Please refer to the full manual for con-
nections with different MFD manufacturers.
Audio
Depending on your audio device, you will need the appropriate audio extension cable/s (not provided). Use the 3.5mm
Audio-In input to connect your chosen device as the source of the audio. Connect the external audio system to Audio-Out
output.
