Oceanic VT 4.0, Operating Manual

Page: 38 / 60

38
VT 4.0 OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5213-r02 (9/6/11)
GAUG DIVE MAIN, information** includes (Fig. 90A/B) -
**Which information is displayed on the Main screen and which is on the Alternates is determined by the SET D menu selection saved during setup
on the surface prior to the dive.
> Current Depth with FT (or M) icon.
> Graphic RUN TIME with Time (up to 999:59 min:sec), 0:00 until started and after reset.
> Max Depth with graphics FT (or M) and MAX, if set for display.
> Graphic EDT with Elapsed Dive Time (up to 599 min).
> Graphic TMT 1 (2, 3, 4), one in use.
> Pressure with PSI (or BAR) and Link icons, if Rcvr and TMT are active, flashing when Link is lost.
> ATR (up to 199 min) with ATR and min icons, dashes ( - - ) if on the surface.
> VARI while ascending.
• A (< 2 sec) to access ALT.
• A (2 sec) to Reset Run Timer (to 0:00).
• A (< 2 sec) to Start/Stop the Run Timer.
• M (2 sec) to access TMT Switching*.
• S (< 2 sec) to activate Smartglo
®
Backlight or acknowledge alarms.
• S (2 sec) to access Compass*.
*These items can only be accessed while viewing the Main.
GAUG DIVE ALT, information includes (Fig. 91A/B) -
> Graphic ALt.
> Max Depth with MAX and FT (or M) icons, if Run Timer is on Main.
> Time of Day (hr:min) with graphic A (or P) if 12 Hour.
> Temperature with ° icon and graphic F (or C).
• A (< 2 sec) to revert to Main.
• Revert to Main in 5 sec, if A is not pressed.
• S (< 2 sec) to activate Smartglo
®
Backlight.
GAUG DELAYED VIOLATION 3 (DV3)
Upon descent deeper the MOD (Max Operating Depth) of 399 FT/120 M, the Audible will sound during which the alarm LED
and (2) Up Arrows will flash (Fig. 92).
Current Depth and Max Depth will only indicate 3 dashes ( - - - ) signifying that you are Out of Range. The Up Arrows will flash
until ascent is made above the MOD.
Upon ascending above the MOD, Current Depth will be restored, however, Max Depth will display 3 dashes for the remainder of
that dive. Also, the Log for that dive will display 3 dashes as the Max Depth.
Fig. 90B - GAUG DIVE MAIN
(if selected)
Fig. 90A - GAUG DIVE MAIN
(default screen)
Fig. 91 - GAUG DIVE ALT
Fig. 92 - GAUG DV3 MAIN
(default with Timer)
A
B
FREE SURFACE
Backlight
(Smartglo)
Menu
SURF.
MAIN
M
2 sec
S
2 sec
A
< 2 sec
Shortcut
Compass
S
< 2 sec
M
< 2 sec
A
< 2 sec
M
2 sec
>
CDT
SET.MENU
OP.MODE
M
< 2 sec
access
selection
ALTs
FREE DIVE
DIVE.
MAIN
2 sec
Compass
Backlight
ALT
S
M
A
< 2 sec
S
< 2 sec
< 2 sec
Start/Stop
Timer
< 2 sec
at 5 FT (1.5 M) for 5 sec
at 2 FT (0.6 M) for 1 sec
Surface.Mode
Dive.Mode