Oceanic Proplus 4.0, Operating Manual

Page: 30 / 50

30
PROPLUS 4.0 OPERATING MANUAL
© Pelagic, 2019 Doc. No. 12-5669-r01 (1/18/19)
ALT 3
The ALT 3 screen displays information pertaining to nitrox; it is bypassed if the ProPlus 4.0 is set for air.
gas #
FO
2
setting
% O2
saturation
0 - 100
current
PO
2
value
DEEP STOP PREVIEW
If Deep Stop was set to ON in the UTIL Menu, the Deep Stop preview screen is available after exceeding 24 m (80 ft) of depth. The Deep Stop is
always at a depth half that of your maximum depth during the dive. This preview screen keeps track of that depth for you.
stop time
Deep Stop
depth
DEEP STOP MAIN
If triggered, the Deep Stop will activate upon ascending to within 3 m (10 ft) below the calculated Deep Stop depth. The stop time will be displayed
and count down to 0:00 min:sec as long as you stay within 3 m (10 ft) above or below the stop. While Deep Stop Main is displayed, you may
access Alt displays by pressing the ADV button to cycle through them. They are similar to the No Decompression Main and Dive ALT displays. See
Deep Stop in the Dive Features chapter for further details.
NOTE: The ProPlus 4.0 does not penalize for a missed Deep Stop.
remaining
stop time
Stop
depth
SAFETY STOP MAIN
If triggered, the Safety Stop will activate upon ascent to within 5 ft (1.5 m) deeper than the Safety Stop depth on a No Deco dive. The stop time will
then countdown to 0:00. While Safety Stop Main is displayed, you may access ALT displays by pressing the ADV button repeatedly. They are similar
to the No Decompression Main and Dive ALT displays See Safety Stop in the Dive Features chapter for further details.
NOTE: The ProPlus 4.0 does not penalize for a missed Safety Stop.
remaining
stop time
Stop
depth