4
Step 5.
Fitting the roof; first check diagonal measurement at base to ensure cabin is square i.e. Diagonals will
be equal.Locate roof panel flush to side and front edge. Screw up through 19 x 19 corner mould
(previously fixed at step 4) firstly drill a 4mm dia hole and fix using 4 x 40 screws – approx 300mm
intervals. Repeat for all roof panels.
(P6)
(P6)
Step 6.
Fit bench supports; all timbers fixed to cabin walls with 6 x 4 x 40 screws pre drill timbers 3.5 mm,
ensure fixing screws pick up main framework in panels (if in doubt add additional support beneath
rail).
The strength of these fixings is critical as the weight of the user is carried by such.
These dimensions will give finished bench heights of 800mm high bench, 500mm low bench.
(P7)
780mm
480mm
Step 7.
