15
Backrests.
Contents. Dependant on cabin type (the number and size will be shown on your parts list)
Two slat Backrests (Celebration) will use 69 x 18 x 125 fixing pads.
Three slat Backrests (Deluxe) will use 32 x 32 x 215 angled fixing pad.
Assembly – Position fixing pad approximately 70mm from end of slat fix using 32 x 3.5 screws (x2)
in from rear through pad into each slat, leave a 18mm gap between slats. Drill and countersink a
3.5mm hole through pad in the gap between slats, to fix to cabin wall.
Fix into cabin using 3.5 x 32 screws. Locate approx 300mm above benches.
