15
To remove the Regulator from the tank:
Close the tank valve and purge all breathing gas from the regulator system by de-
pressing the purge button of the second stage regulator.
Turn the DIN connector wheel counter clockwise out of cavity in the tank valve.
Prevent water from entering the first stage. DO NOT blow air near a first stage
that does not have the protector cap in place.
Place the protector cap on the threads of the regulator DIN connector wheel.
DIN TO USA CONVERTER YOKE
WARNING: The DIN to USA Converter is specifically designed for use with
Oceanic brand first stages. Although it may fit other brand first stages, it
was not designed to do so or tested for use with other brands. Under no
circumstances should the Oceanic DIN to USA Converter be used with any
other first stage than an Oceanic model.
To install the DIN to USA Converter:
Remove the protector cap from the threads of the regulator DIN connector wheel, and
examine the threads and sealing o-ring. Replace the o-ring if it is damaged.
Using care not to cross the threads, thread the DIN to USA Converter clockwise onto
the first stage DIN connector wheel until it is secure. DO NOT use tools to tighten.
All manuals and user guides at all-guides.com
