12
Disconnecting Your Console with a DataLink:
Ensure that the regulator system is purged of all breathing gas.
While holding the hose portion of the disconnect with one hand, turn the locking ring
of the first stage portion counter clockwise (as viewed from the first stage).
Using care not to bend the DataLink parts, pull the two portions of the quick discon-
nect straight apart to remove the HP hose and instrument console.
NOTE: Once the DataLink has been disconnected, the regulator system can
again be pressurized.
REGULATOR ATTACHMENT TO A TANK
WARNING: Maximum working pressure for an Oceanic Yoke style connec-
tor is 3500 PSI / 232 BAR and for a DIN style connector is 4500 PSI / 300
BAR
YOKE STYLE CONNECTOR
Before attaching the Regulator to the tank:
Slowly open then close the tank valve for a second to allow a momentary flow of
breathing gas to blow any moisture or contaminants from the breathing gas opening
in the tank valve.
Examine the sealing o-ring located on the tank valve to ensure that it is not cut, frayed,
or deteriorated. Replace the o-ring if it is damaged.
All manuals and user guides at all-guides.com
