7) Inputs and Controls S12A
The Power Switch (toggle) has three positions.
1.) In the left most position the unit is powered OFF.
2.) In the center position the unit is in Auto mode. It can
be powered on uniting the 12V trigger inputs or
by feeding audio into the input XLR. In the absence of
either it will enter STANDBY mode with the red LED
illuminating.
When the trigger is activated or audio is supplied it will
power up and the green LED will illuminate.
3.) The right most position is will power up to ON with the
green LED illuminating. It will remain ON in this position.
The Voltage auto selects between 100v and 240v-
115W 50/60HZ
