Using a small diameter blunt tool (i.e. plain end of a cotton swab), depress the
LED Selector
pushbutton for a short (1/2 second or less) duration. Each press will toggle the LEDS into different
flashing sequences that will match the legend above. When the desired sequence is flashing,
depress the switch for a full second. This will load that program and the LEDs will change from
flashing to full illumination.
N.B. A long push (1 sec or more) without first being preceded by a short push will toggle the
input from its alternate state (analog to digital or visa-versa
).You’ll see LED 1 or LED 2 change
to
their opposite state to indicate this. Avoid doing this unintentionally. Begin with short
pushes to
toggle through the 4 preset options and use the long push to select the desired
preset.
Selecting Presets
