HR4
LED 1
–when illuminated indicates preset selected requires an analog signal
LED2
– when illuminated indicates preset selected requires an AES-EBU digital signal
LEDS 3 & 4
- will be illuminated or dark in combinations specified in the legend above
To indicate which of the 4 presets is currently active.
Preset 1
– default preset the speaker is shipped with. It is an analog input 2-way (full range)
configuration. Use
Analog In
XLR. (
LED 1 on, LED 3 & 4 off
)
.
Preset 2
- Is an analog 3-way (85Hz 4
th
order L-R high pass filter) for use with a sub-woofer.
Use
Analog In
XLR (
LED 1 on, LED 3 off / LED 4 on
).
Preset 3
– Is an AES-EBU digital left input with 2-way response. Use
Digital In
XLR (
LED 2 on, LED 3 on / LED 4 off
).
Preset 4
– Is an AES-EBU digital right input with 2-way response. Use
Digital In
XLR
4)
Input Selection and Legends
