5
O
TS PO
WER
CO
M
EARPHONE/MICROPHONE (EM) CABLE
The EM cable connects the EM Connector to an EM assembly with an 8-pin
connection. The threaded locking collar can be tightened to make a secure
connection to the PowerCom unit.
TRANSDUCER ASSEMBLY
The Transducer Assembly acts as the “antenna” of the unit. Transducers
are replaceable.
TRANSDUCER RING
The Transducer Ring is a rotating locking ring that secures the Transducer
or Transducer Cable (TCA-35S) when used with the CDK-6 Surface
Conversion Kit.
EARPHONE/MICROPHONE (EM) CONNECTOR
The EM connector at the top the unit connects the PowerCom to an
EM assembly and to the battery charger. Modularity allows for easy
replacement for repairs or optional cable assemblies.
MAIN HOUSING
The main housing of the unit contains the electronics and battery
compartment of the system. The connectors to the Transducer and the
Earphone/Microphone cables are user replaceable. The Belt Clip located at
the back of the unit is also user replaceable. Do not disassembled the main
housing beyond this point. Doing so could potentially void any warranties.
Main housing should only be accessed by an authorized technician.
BELT CLIP
The belt clip can be mounted on a belt or on a BCD tank strap. For best
range between divers and surface station, it is recommended to mount
the unit as far back on the tank strap as possible.
RECHARGEABLE LITHIUM-ION BATTERY
The Lithium-Ion battery provides power to the Powercom unit. The battery is
located on the lower cavity of the unit on a strip of Velcro inside the Rubber
Armored Base. This battery does not require any maintenance other than
charging.
Summary of Contents for PowerCom 3000D
Page 1: ...User Manual...
Page 6: ...v OTS POWERCOM...
