E-7
7.
Place the TONE ARM (#7) over the part of the record you want to play, and lower the TONE ARM
(#7) using TONE ARM LIFT LEVER (#4). The TONE ARM will automatically lower onto the record
and begin playing.
8.
Slowly adjust the output volume to the desired level.
9.
At the end of the record, the platter will automatically stop spinning if the AUTO STOP ON/OFF
SELECTOR (#5) remains in the "ON" position. Lift the TONE ARM (#7) away from the record
surface and return it to the Tone Arm Rest.
10. To stop playing manually, lift the TONE ARM (#7) from the record surface using the TONE ARM
LIFT LEVER (#4) while playing and return it to the Tone Arm Rest directly.
Notes:
The PITCH CONTROL (#16) allows you to fine tune the playing speed of the record once the
correct speed (33/45/78 RPM) is chosen. Rotate the PITCH CONTROL to slightly increase or
decrease the speed of the turntable if necessary.
Certain types of records may have an auto-stop area outside the preset limit, so the turntable
may stop before the last track finishes. If this occurs, set the AUTO STOP ON/OFF SELECTOR
(#5) to the "OFF" position. This allows the record to play to the end, but please note that it will not
stop automatically. You must manually lift the TONE ARM (#7) and place it back on the Tone Arm
Rest and then set the AUTO STOP ON/OFF SELECTOR (#5
) to the “ON” position to stop the
turntable from spinning.
To stream your record music to external Bluetooth speakers (not included), see the BLUETOOTH
OUT OPERATION section.
BLUETOOTH IN OPERATION
An external device with Bluetooth Connectivity, like a cell phone, can be wirelessly connected to the
RP-TT70 system using the Bluetooth IN function.
1.
Rotate the FUNCTION SELECTOR (#13) to select the
IN
mode.
2.
Rotate the POWER/VOLUME CONTROL (#12) clockwise to turn the
unit ON. A click sound will be heard and the POWER/FUNCTION
INDICATOR (#10) will light "blue" and begin to flash.
3.
Turn on the Bluetooth feature of your Bluetooth device and enable
the search or scan function to find the “RP-TT70” under the available
device list.
4.
Select "RP-TT70" from the device list when it appears on your device's screen. If required, enter
the pass code “0000” to pair (link) the "RP-TT70" with your device.
5.
Once connected, the POWER/FUNCTION INDICATOR (#10) will stop flashing and remain lit
"blue".
6.
You are now connected to your external Bluetooth device.
7.
Rotate the POWER/VOLUME CONTROL (#12) and/or the volume control on your Bluetooth
device to adjust the sound level.
Notes:
1.
Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth enabled devices
for correct Bluetooth operation since it may vary from model to model.
2.
If your Bluetooth enabled device does not support A2DP profile, it will not play the music through
the speaker, even if correctly paired (linked).
3.
Remember to turn OFF the RP-TT70 system when you have finished listening.
