E-6
SETTING UP THE SYSTEM
TheRP-TT70system is powered by an external AC adaptor with an output of
DC 12V
2A
.
POWER CONNECTION
1. Connect the cord of the power adaptor to the DC IN JACK (#17) located on the back panel of the
main unit.
2. Plug the AC adaptor into a household 120V~ 60Hz AC wall socket.
CONNECTING THE SPEAKERS
The wires attached to the speakers have RCA type SPEAKER CONNECTORS (#19) on the ends for
easy connection. Plug the speaker you place on the right side of the turntable into the red color coded
SPEAKER OUTPUT JACK (R) on the back of the main unit. Plug the speaker you place on the left side
of the turntable into the white color coded SPEAKER OUTPUT JACK (L) on the back of the main unit.
TURNING THE MAIN UNIT OFF AND ON
When the POWER/VOLUME CONTROL (#12) is fully rotated counter-clockwise, you will hear a click
sound and the POWER/FUNCTION INDICATOR (10) will turn off confirming the power is OFF. From
the OFF position, rotate the POWER/VOLUME CONTROL (#12) clockwise and you will hear a click
sound again and the POWER/FUNCTION INDICATOR (10) will turn on confirming the power is ON.
When the power is ON, you can rotate the control normally to adjust the volume of the music playing.
PHONO OPERATION
CARE OF THE TONE ARM AND STYLUS
Remove the white plastic stylus guard from the
cartridge.
Be sure that the TONE ARM (#7) is unlocked
and free to move away from the Tone Arm Rest
prior to operating.
Lock the TONE ARM (#7) in place with the
TONE ARM LATCH (#8) when not in use.
PLAYING A RECORD
1.
Rotate the FUNCTION SELECTOR (#13) to PHONO mode.
2.
Rotate the POWER/VOLUME CONTROL (#12) clockwise to turn the
unit ON. A click sound will be heard and the POWER/FUNCTION
INDICATOR (#10) will light "red".
3.
Raise the Turntable Dust Cover.
4.
Place a record on the TURNTABLE PLATTER (#1), use the 45 RPM
ADAPTOR (#3) if required.
5.
Set the 33/45/78 RPM SELECTOR (#6) to the proper position
depending on the record to be played.
6.
Raise the TONE ARM (#7) from the Tone Arm Rest by using
the TONE ARM LIFT LEVER (#4) and slowly move it over the
record. The TURNTABLE PLATTER (#1) will start to rotate.
