12
Gordon Smart Recorder User Guide
Appendix C
Actions Menu
The Actions Menu will allow you to set the time, change network settings, reset and disconnect from the
Battery Pack.
Set the Smart Recorder time from this PC
Will Set the time using your computer time.
Same action as clicking Set Time under Status Display.
Change the Smart Recorder’s network settings
Allows users to set the IP Address of the Smart Recorder and Add Channel IP Addresses.
The Smart Recorder sets up a local Network from the smart recorder to the hydrophone(s). The IP
addresses for the hydrophones will automatically be set by the Smart Recorder Board.
All hydrophones that are connected to a Smart Recorder will obtain the same IP address, this will
require the user to set the IP address of the hydrophone again using Marco when the hydrophone is
plugged into the PC ethernet/network.
Reset the connected Smart Recorder
Will reset the Smart Recorder.
Disconnect from the Smart Recorder
Will disconnect the Bluetooth connection from the Smart Recorder and the PC.
