SafeSea V100 User Manual
11
Version 0A.00 21/07/2011
Individual Menu Modes
Mem Scan Enable (MSCAN EN)
In this Menu mode the channels that are marked for Memory Scan are
shown. Any number of channels may be so marked.
All Channel Scan Inhibit (ASCAN INH)
In this Menu mode the channels will be shown for marking as inhibited (or
for re-enabling) for All Channel Scan. Any number of channels can be so
marked.
Key Lock (KEY LOCK)
This Menu mode allows the user to toggle the key lock functionality On or
Off.
Key Beep Disable (KEY BEEP)
This Menu mode allows the user to toggle the key beep On or Off.
Scan Dwell Time (SCAN DWEL)
This Menu mode allows selection of the dwell time in Scanning that the
radio stays on the channel after the received signal has gone away. The
value shown is in seconds.
Light Dell Time (LIGHT DWELL)
This menu mode allows selection of the time that the lights stay on after
the last key press. The value shown is in seconds.
Squelch Overide (SQ DEFEAT)
This Menu mode option allows the user to select the squelch override
mode. The options are ‘override while
SQ
key is pressed’ and ‘override
until the
SQ
key is pressed and held again until the double beep is held’.
Squelch Override Time (SQ TIMER)
This option allows the time the squelch override is open. It can be
adjusted between 1 and 10seconds.
Calling Channel Select (CALL CHAN)
This Menu mode allows selection of the Calling channel. This is the
channel that the 16 key uses to toggle between channels.
Last Used Channel enable (LAST CHAN)
This menu mode sets the radio to use the last used channel when it is
turned on. The Default is Off, in which case channel 16 is the default
channel on turn on.
