SafeSea V100 User Manual
10
Version 0A.00 21/07/2011
Note: if there are no channels already entered, pressing this key will have no effect.
To exit the Memory Scan mode, press the
SCAN
or
▼
key.
Scan advance
In any of the scanning modes, pressing the
▲
key will advance the scan
on one channel.
Setting Scan Channels
In the normal radio mode, it is possible to set scanning options for each
channel.
To enter channels into the scan memory, select the required channel and
double press the
SCAN
key. The
legend will appear on the LCD to
indicate this channel is in the scan memory.
If the channel was already marked as a Memory Scan channel, this
operation will remove it from the scan memory and the
legend will
disappear.
To inhibit a channel from the all scan memory, press and hold the
SCAN
key until a triple beep is heard. This will inhibit the channel from scanning
and the
legend will appear on the LCD
If the channel was already inhibited as a scan channel, this operation will
enable it again and the
legend will disappear.
Menu
In the menu mode the following options are available:- Memory Scan
Enable, All Scan Inhibit, Key Lock, Key Beep Disable, Scan Dwell Time,
Light Dwell Time, Squelch Override Defeat, Squelch Override Time, Calling
Channel Select, Last Used Channel Enable, Serial number, Software Issue.
To enter the Menu Mode, press and hold the
VOL
key until a double beep
is heard.
Press the Enter key (Sq) to select the available options.
Once in the Menu mode, use the
▲
or
▼
keys to scroll through the
options listed above. The menu option will be displayed in the additional
area of the LCD screen.
When the desired option is selected, press the
SQ
key to adjust the
setting or value, shown in the channel number.
Use the
▲
or
▼
keys to adjust the value.
Press the
SQ
key to enter the new value.
Press the
16
key or press and hold the
VOL
key to exit Menu mode.
I
I
E
E